From f072c795bc3f5eae1a249b89874d35eb9b8b2e46 Mon Sep 17 00:00:00 2001 From: Robert Marko Date: Fri, 19 Jun 2020 14:01:58 +0200 Subject: [PATCH 14/40] ipq40xx: add Edgecore ECW5211 support This patch adds support for the Edgecore ECW5211 indoor AP. Specification: - SoC: Qualcomm Atheros IPQ4018 ARMv7-A 4x Cortex A-7 - RAM: 256MB DDR3 - NOR Flash: 16MB SPI NOR - NAND Flash: 128MB MX35LFxGE4AB SPI-NAND - Ethernet: 2 x 1G via Q8075 PHY connected to ethernet adapter via PSGMII (802.3af POE IN on eth0) - USB: 1 x USB 3.0 SuperSpeed - WLAN: Built-in IPQ4018 (2x2 802.11bng, 2x2 802.11 acn) - CC2540 BLE connected to USB 2.0 port - Atmel AT97SC3205T I2C TPM Signed-off-by: Robert Marko --- package/boot/uboot-envtools/files/ipq40xx | 1 + package/firmware/ipq-wifi/Makefile | 2 + .../ipq-wifi/board-edgecore_ecw5211.qca4019 | Bin 0 -> 24324 bytes .../ipq40xx/base-files/etc/board.d/01_leds | 1 + .../ipq40xx/base-files/etc/board.d/02_network | 1 + .../etc/hotplug.d/firmware/11-ath10k-caldata | 2 + .../base-files/lib/upgrade/platform.sh | 1 + .../arm/boot/dts/qcom-ipq4018-ecw5211.dts | 325 ++++++++++++++++++ target/linux/ipq40xx/image/Makefile | 12 + .../901-arm-boot-add-dts-files.patch | 3 +- 10 files changed, 347 insertions(+), 1 deletion(-) create mode 100644 package/firmware/ipq-wifi/board-edgecore_ecw5211.qca4019 create mode 100644 target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts diff --git a/package/boot/uboot-envtools/files/ipq40xx b/package/boot/uboot-envtools/files/ipq40xx index 7bcad00b01..ad0fd62e66 100644 --- a/package/boot/uboot-envtools/files/ipq40xx +++ b/package/boot/uboot-envtools/files/ipq40xx @@ -32,6 +32,7 @@ ubootenv_mtdinfo () { case "$board" in alfa-network,ap120c-ac |\ +edgecore,ecw5211 |\ glinet,gl-b1300 |\ openmesh,a42 |\ openmesh,a62) diff --git a/package/firmware/ipq-wifi/Makefile b/package/firmware/ipq-wifi/Makefile index 25731ddc56..1609d7a42d 100644 --- a/package/firmware/ipq-wifi/Makefile +++ b/package/firmware/ipq-wifi/Makefile @@ -29,6 +29,7 @@ ALLWIFIBOARDS:= \ avm_fritzbox-7530 \ avm_fritzrepeater-1200 \ avm_fritzrepeater-3000 \ + edgecore_ecw5211 \ edgecore_ecw5410 \ engenius_eap1300 \ engenius_ens620ext \ @@ -102,6 +103,7 @@ $(eval $(call generate-ipq-wifi-package,asus_map-ac2200,ASUS MAP-AC2200)) $(eval $(call generate-ipq-wifi-package,avm_fritzbox-7530,AVM FRITZ!Box 7530)) $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200)) $(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-3000,AVM FRITZ!Repeater 3000)) +$(eval $(call generate-ipq-wifi-package,edgecore_ecw5211,Edgecore ECW5211)) $(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410)) $(eval $(call generate-ipq-wifi-package,engenius_eap1300,EnGenius EAP1300)) $(eval $(call generate-ipq-wifi-package,engenius_ens620ext,EnGenius ENS620EXT)) diff --git a/package/firmware/ipq-wifi/board-edgecore_ecw5211.qca4019 b/package/firmware/ipq-wifi/board-edgecore_ecw5211.qca4019 new file mode 100644 index 0000000000000000000000000000000000000000..340cfcc7a20cb88ed6fca7369b380a3d341f76ee GIT binary patch literal 24324 zcmeHPdr%We8gCH92Np~SuMj37JmW%y@Gv3@0mJ}vpom~V5fG7#vLf%7m+JSZ+M22e`Y5nBK@!<1i9wkfYDKQO;o z5wx#JQ4*vm*c42b@(<^g77)b{NnmAOsUq*w@=aR`4(#7|xO9KemblDtaY#sUu@!8C z58LCf`}&-f6C5WioG0Y zG@58SEn`phF~!0M;OXRgtwhjJVA~o>GiB?btKT_}F=BK8YGsPF#PFY>fB>OC81EbH z=&q>Qo)s}Vq;*(3+D}x=N=%eMhclv8gV5i9Vtg}{YM{(eW#VqeVIm&JON#*|<0D&G*2{wjdt#b| z)oz7PZq)W-ErB&$#lveyIujZKO5Jih2eLaiH1Nxu^1kXT?1(-YP~n>YY-ndoNG)H% z&VJfob1t<(ROY$w-au97FU|y2aSL1ecDF}<=3nVnaBrx-C;X^)iA&y<%Zl@|)1Op% z6x|)Fys+*Vuf!>LVWGrCOCw-ww{rCw2gJ$Q)!oCBM}On%bK*Pp=LEJxUV*KwtgWr# z#n{?<*)n)FUal3p-s8D3{AWkEiBTUPZ}{gc@bdB&cnJg5vS}QBl)3F2z_|NL)%P9|u(AQfa z;K2gh?%hxC-#bH%vJpm4dpm0zoBu(Z13X}Q{~vY!R4enhEg6LOBe40BV=aS3B6{-E ziw_|J0W=T_%H?Xcx!F)%dmLSRv#=RM1wj!+ib|0XGz2NBs6BS7sipn=R0Tw7<$+lW z3uTE|&shiu<%l?#BkG8_p|NPJDE4_Ql7uFSlCT&w29cp+R4fud7bB5qq$m;#MuQOv zstZDO$+)VEDJn`A6{Ai$KBhq8ggU);LOf6pkp~us#=VY1lF?*QG8T%4z79n;q8mjU zG3p=~Zpp4F=;wV)oVz7WszJl#J4ex9S&VDO{$FNmTMYN4%ot2L`V2}8O4A^~oEp;r zGr_zhQJR1NQ(zEa5MU5s5MU5s5Lm(pxQbm79&4+3E0W4uFJ6yCvsTao((>Cb-F$4g zr62vx%cu6Sl9mtF#}Yn-%+Sq5;NMfk%m(JGx~VG!rq-LUIOnNdYUw8p>g7HH)y# z(`og=nmucWfS51{rp|ooAv)UYh5a0)?Q39BJv^k+iL3^yN@DDJ(gz5Km`e1=E z4J~*CG}rCf*471Z1p+QH!$s3`P%c8D2X+U_Tx{4b_~qI={OxqPzn`zq$4u199ko_R ztQw%q2wAU z7TZX#f|Bc>n7EN%0W}}QX+0J{x(ntsSX_acvSyr;kyF^x@zrJZ$k;d2>5B^${b<w7gva}m2BC@VpnfTXY@#1Y75 zR#q4Bnc4<@oul)G@`z(5?_L~k67T-tJu53ny02~}S>VpS6e`YJ39b?V?f|SLc=v#0 zffLF^@!m0+cW*zLcRwq5`2akkd!ied%)2MqK5SZG5G zyO;fPA_Vj$#xZ*98aIbWusOF;9NXU ztMNQN=3+Aj2E)6jo-!ZkA2yeuYRVjnA>*FXNysR)=6!4I+?}fp+eJ)vKYTIq2}56+ zsr^^CRZVrcJWd|>W8o=~q`N)A3L|R6VTf#c_FxByjAus;#bA9xLG!4v!zeAMw7rr8-fUjbk|W=8C#p zwWlru_fy|fcHpJ5c!?M~wAUS?9e(%FUkF|etB%%X;0bsF?CWHG7M_l$tH+exc)4s# zfE(GvK|GrZ>B%S&(sfmBT^cUMrDG$?X8eFWNuH#>uk6GtWwHQ|u{)|S$&h$NNKZxs zU=P<-^-2XEi^q=Lgbqcd!wuC1yjUictQ)_tzNDxB5&-rW`;9B?hHw5LgVS#xz4?%u5yl^`)Ink+ps} zXHWmdw1$oKJ_=WPc}K!2;So;0eZr%@{mq-|ybrj_`!1$7tgjXnxn@7^$J^sS3#sB3 ze9@ahyuSc&HnoVjMp-TwTx$YcD2&e`{R zw$=)ZT+$q*4XVs$_+EqqYm!cPrv5Ul(oJqJyEU-)OUX%Iv2)Jj9;{xZaNpq&+t|IU zIk*}vT9Y(t;X|kwj`V7pU4!i-kadmLtYTUspn1P)zh4M zf?xkK2EOTX)hXfec*wh7yFnnOk`K&%ju6T6$IC=WBS7%tZ6Ggx*ZHeY=7Sec_cLGl zbbNc-{xLcCMBfbWo?Ppi?S|pq&lWkx&tefUWzBdxuDzk%Vh1?Kz$~A4Kl`iMN23gx H5%T{5!-kmb literal 0 HcmV?d00001 diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds index 9cd51e5de0..6bc21a67e9 100755 --- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds +++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds @@ -55,6 +55,7 @@ zyxel,nbg6617) ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2G" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5G" "phy1tpt" ;; +edgecore,ecw5211 |\ zyxel,wre6606) ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:green:wlan2g" "phy0tpt" ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:green:wlan5g" "phy1tpt" diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 01825b8bac..6e0fb52ab4 100755 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -18,6 +18,7 @@ ipq40xx_setup_interfaces() ucidef_set_interfaces_lan_wan "eth0" "eth1" ;; asus,map-ac2200|\ + edgecore,ecw5211|\ openmesh,a42|\ openmesh,a62) ucidef_set_interfaces_lan_wan "eth1" "eth0" diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index b0035ce8a3..7d2e173e1a 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -158,6 +158,7 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3D000 -e 0x207 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; compex,wpj428 |\ + edgecore,ecw5211 |\ engenius,eap1300 |\ openmesh,a42 |\ openmesh,a62 |\ @@ -220,6 +221,7 @@ case "$FIRMWARE" in /usr/bin/fritz_cal_extract -i 1 -s 0x3C000 -e 0x208 -l 12064 -o /lib/firmware/$FIRMWARE $(find_mtd_chardev "urlader1") ;; compex,wpj428 |\ + edgecore,ecw5211 |\ engenius,eap1300 |\ openmesh,a42 |\ openmesh,a62 |\ diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh index a7b7da1bf3..e0a9301fe0 100644 --- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh @@ -51,6 +51,7 @@ platform_do_upgrade() { avm,fritzbox-7530 |\ avm,fritzrepeater-1200 |\ avm,fritzrepeater-3000 |\ + edgecore,ecw5211 |\ qxwlan,e2600ac-c2) nand_do_upgrade "$1" ;; diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts new file mode 100644 index 0000000000..6c9b31b99d --- /dev/null +++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ecw5211.dts @@ -0,0 +1,325 @@ +#include "qcom-ipq4019.dtsi" +#include +#include +#include + +/ { + model = "Edgecore ECW5211"; + compatible = "edgecore,ecw5211"; + + aliases { + led-boot = &led_power; + led-failsafe = &led_power; + led-running = &led_power; + led-upgrade = &led_power; + }; + + chosen { + bootargs-append = " root=/dev/ubiblock0_1"; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&tlmm 63 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_power: power { + label = "ecw5211:yellow:power"; + gpios = <&tlmm 5 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "ecw5211:green:wlan2g"; + gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>; + }; + + wlan5g { + label = "ecw5211:green:wlan5g"; + gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + }; + }; + + soc { + rng@22000 { + status = "okay"; + }; + + mdio@90000 { + status = "okay"; + + pinctrl-0 = <&mdio_pins>; + pinctrl-names = "default"; + }; + + ess-psgmii@98000 { + status = "okay"; + }; + + counter@4a1000 { + compatible = "qcom,qca-gcnt"; + reg = <0x4a1000 0x4>; + }; + + tcsr@1949000 { + compatible = "qcom,tcsr"; + reg = <0x1949000 0x100>; + qcom,wifi_glb_cfg = ; + }; + + tcsr@194b000 { + status = "okay"; + + compatible = "qcom,tcsr"; + reg = <0x194b000 0x100>; + qcom,usb-hsphy-mode-select = ; + }; + + ess_tcsr@1953000 { + compatible = "qcom,tcsr"; + reg = <0x1953000 0x1000>; + qcom,ess-interface-select = ; + }; + + tcsr@1957000 { + compatible = "qcom,tcsr"; + reg = <0x1957000 0x100>; + qcom,wifi_noc_memtype_m0_m2 = ; + }; + + usb2: usb2@60f8800 { + status = "okay"; + }; + + usb3: usb3@8af8800 { + status = "okay"; + }; + + crypto@8e3a000 { + status = "okay"; + }; + + watchdog@b017000 { + status = "okay"; + }; + + ess-switch@c000000 { + status = "okay"; + }; + + edma@c080000 { + status = "okay"; + }; + }; +}; + +&tlmm { + mdio_pins: mdio_pinmux { + mux_mdio { + pins = "gpio53"; + function = "mdio"; + bias-pull-up; + }; + + mux_mdc { + pins = "gpio52"; + function = "mdc"; + bias-pull-up; + }; + }; + + serial_pins: serial_pinmux { + mux { + pins = "gpio60", "gpio61"; + function = "blsp_uart0"; + bias-disable; + }; + }; + + spi0_pins: spi0_pinmux { + pin { + function = "blsp_spi0"; + pins = "gpio55", "gpio56", "gpio57"; + drive-strength = <2>; + bias-disable; + }; + + pin_cs { + function = "gpio"; + pins = "gpio54", "gpio4"; + drive-strength = <2>; + bias-disable; + output-high; + }; + }; + + i2c0_pins: i2c0_pinmux { + mux_i2c { + function = "blsp_i2c0"; + pins = "gpio58", "gpio59"; + drive-strength = <16>; + bias-disable; + }; + }; +}; + +&blsp_dma { + status = "okay"; +}; + +&blsp1_spi1 { + status = "okay"; + + pinctrl-0 = <&spi0_pins>; + pinctrl-names = "default"; + cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 4 GPIO_ACTIVE_HIGH>; + + flash@0 { + status = "okay"; + + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "0:SBL1"; + reg = <0x00000000 0x00040000>; + read-only; + }; + + partition@40000 { + label = "0:MIBIB"; + reg = <0x00040000 0x00020000>; + read-only; + }; + + partition@60000 { + label = "0:QSEE"; + reg = <0x00060000 0x00060000>; + read-only; + }; + + partition@c0000 { + label = "0:CDT"; + reg = <0x000c0000 0x00010000>; + read-only; + }; + + partition@d0000 { + label = "0:DDRPARAMS"; + reg = <0x000d0000 0x00010000>; + read-only; + }; + + partition@e0000 { + label = "0:APPSBLENV"; /* uboot env*/ + reg = <0x000e0000 0x00010000>; + read-only; + }; + + partition@f0000 { + label = "0:APPSBL"; /* uboot */ + reg = <0x000f0000 0x00080000>; + read-only; + }; + + partition@170000 { + label = "0:ART"; + reg = <0x00170000 0x00010000>; + read-only; + }; + }; + }; + + spi-nand@1 { + status = "okay"; + + compatible = "spinand,mt29f"; + reg = <1>; + spi-max-frequency = <24000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "rootfs"; + reg = <0x00000000 0x08000000>; + }; + }; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + pinctrl-0 = <&i2c0_pins>; + pinctrl-names = "default"; + + tpm@29 { + compatible = "atmel,at97sc3204t"; + reg = <0x29>; + }; +}; + +&blsp1_uart1 { + status = "okay"; + + pinctrl-0 = <&serial_pins>; + pinctrl-names = "default"; +}; + +&cryptobam { + status = "okay"; +}; + +&gmac0 { + qcom,poll_required = <1>; + qcom,poll_required_dynamic = <1>; + qcom,phy_mdio_addr = <4>; + vlan_tag = <2 0x20>; +}; + +&gmac1 { + qcom,poll_required = <1>; + qcom,poll_required_dynamic = <1>; + qcom,phy_mdio_addr = <3>; + vlan_tag = <1 0x10>; +}; + +&wifi0 { + status = "okay"; + + qcom,ath10k-calibration-variant = "Edgecore-ECW5211"; +}; + +&wifi1 { + status = "okay"; + + qcom,ath10k-calibration-variant = "Edgecore-ECW5211"; +}; + +&usb3_ss_phy { + status = "okay"; +}; + +&usb3_hs_phy { + status = "okay"; +}; + +&usb2_hs_phy { + status = "okay"; +}; diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index 98c81726d9..553ac66fa3 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -171,6 +171,18 @@ define Device/compex_wpj428 endef TARGET_DEVICES += compex_wpj428 +define Device/edgecore_ecw5211 + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_TITLE := Edgecore ECW5211 + BLOCKSIZE := 128k + PAGESIZE := 2048 + DEVICE_DTS_CONFIG := config@ap.dk01.1-c2 + DEVICE_DTS := qcom-ipq4018-ecw5211 + DEVICE_PACKAGES := ipq-wifi-edgecore_ecw5211 kmod-tpm-i2c-atmel kmod-usb-acm uboot-envtools +endef +TARGET_DEVICES += edgecore_ecw5211 + define Device/engenius_eap1300 $(call Device/FitImage) DEVICE_TITLE := EnGenius EAP1300 diff --git a/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch b/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch index f7efd415f1..9b1d825be1 100644 --- a/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch +++ b/target/linux/ipq40xx/patches-4.14/901-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -697,7 +697,31 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -697,7 +697,32 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8074-dragonboard.dtb \ qcom-apq8084-ifc6540.dtb \ qcom-apq8084-mtp.dtb \ @@ -18,6 +18,7 @@ Signed-off-by: John Crispin + qcom-ipq4018-ap120c-ac.dtb \ + qcom-ipq4018-ea6350v3.dtb \ + qcom-ipq4018-eap1300.dtb \ ++ qcom-ipq4018-ecw5211.dtb \ + qcom-ipq4018-ens620ext.dtb \ + qcom-ipq4018-ex6100v2.dtb \ + qcom-ipq4018-ex6150v2.dtb \ -- 2.25.1