# Example hostapd build time configuration
#
# This file lists the configuration options that are used when building the
# hostapd binary. All lines starting with # are ignored. Configuration option
# lines must be commented out complete, if they are not to be included, i.e.,
# just setting VARIABLE=n is not disabling that variable.
#
# This file is included in Makefile, so variables like CFLAGS and LIBS can also
# be modified from here. In most cass, these lines should use += in order not
# to override previous values of the variables.

# Driver interface for Host AP driver
CONFIG_DRIVER_HOSTAP=y

# Driver interface for wired authenticator
CONFIG_DRIVER_WIRED=y

# Driver interface for Prism54 driver
#CONFIG_DRIVER_PRISM54=y

# Driver interface for drivers using the nl80211 kernel interface
CONFIG_DRIVER_NL80211=y

# IEEE 802.11F/IAPP
CONFIG_IAPP=y

# WPA2/IEEE 802.11i RSN pre-authentication
CONFIG_RSN_PREAUTH=y

# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
CONFIG_PEERKEY=y

# Integrated EAP server
CONFIG_EAP=y

# EAP-MD5 for the integrated EAP server
CONFIG_EAP_MD5=y

# EAP-TLS for the integrated EAP server
CONFIG_EAP_TLS=y

# EAP-MSCHAPv2 for the integrated EAP server
CONFIG_EAP_MSCHAPV2=y

# EAP-PEAP for the integrated EAP server
CONFIG_EAP_PEAP=y

# EAP-GTC for the integrated EAP server
CONFIG_EAP_GTC=y

# EAP-TTLS for the integrated EAP server
CONFIG_EAP_TTLS=y

# Wi-Fi Protected Setup (WPS)
CONFIG_WPS=y
CONFIG_WPS2=y
# Enable UPnP support for external WPS Registrars
CONFIG_WPS_UPNP=y

# PKCS#12 (PFX) support (used to read private key and certificate file from
# a file that usually has extension .p12 or .pfx)
CONFIG_PKCS12=y

# Build IPv6 support for RADIUS operations
CONFIG_IPV6=y

# IEEE Std 802.11r-2008 (Fast BSS Transition)
CONFIG_IEEE80211R=y

# IEEE 802.11n (High Throughput) support
CONFIG_IEEE80211N=y

# IEEE 802.11ac (Very High Throughput) support
CONFIG_IEEE80211AC=y

# IEEE 802.11ax (HE Throughput) support
CONFIG_IEEE80211AX=y

# IEEE 802.11be (EHT Throughput) support
CONFIG_IEEE80211BE=y

CONFIG_TLS=openssl
CONFIG_INTERNAL_LIBTOMMATH=y
NEED_AES_DEC=y

CONFIG_NO_RANDOM_POOL=y
CONFIG_NO_DUMP_STATE=y

CONFIG_WPS=y
CONFIG_FULL_DYNAMIC_VLAN=y

CONFIG_UBUS=y
CONFIG_HS20=y
CONFIG_P2P_MANAGER=y
CONFIG_INTERWORKING=y
CONFIG_WNM=y
CONFIG_PROXYARP=y
CONFIG_LIBNL32=y
CONFIG_LIBNL3_ROUTE=y

CONFIG_AIRTIME_POLICY=y
CONFIG_FILS=y
CONFIG_CTRL_IFACE_MIB=y
CONFIG_SAE=y
CONFIG_OWE=y

# Driver interface for MACsec (Only for wired network)
CONFIG_DRIVER_MACSEC_QCA=y

# Enable MACsec support for hostapd
CONFIG_MACSEC=y