wlan-ap-Telecominfraproject/feeds/qca/hostapd/patches/r07-99-hostapd-sync-nl80211.patch

From b843bace92c93d20a24f8b6fed437b35852f4108 Mon Sep 17 00:00:00 2001
From: Sriram R <quic_srirrama@quicinc.com>
Date: Wed, 8 Nov 2023 09:33:24 +0530
Subject: [PATCH] hostapd: sync nl80211

sync nl80211 based on latest header in kernel

Signed-off-by: Sriram R <quic_srirrama@quicinc.com>
---
 src/drivers/nl80211_copy.h | 287 ++++++++++++++++++++++++++++---------
 1 file changed, 216 insertions(+), 71 deletions(-)

--- a/src/drivers/nl80211_copy.h
+++ b/src/drivers/nl80211_copy.h
@@ -1311,15 +1311,20 @@
  *	The number of peers that HW timestamping can be enabled for concurrently
  *	is indicated by %NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS.
  *
+ * @NL80211_CMD_LINKS_REMOVED: Notify userspace about the removal of STA MLD
+ *	setup links due to AP MLD removing the corresponding affiliated APs with
+ *	Multi-Link reconfiguration. %NL80211_ATTR_MLO_LINKS is used to provide
+ *	information about the removed STA MLD setup links.
+ *
  * @NL80211_CMD_UPDATE_HE_MUEDCA_PARAMS: Updated MU-EDCA parameters from driver.
- *	This event is used to update MU-EDCA parameters in Beacon frame, which
- *	were indicated by driver and now need to be reflected in
- *	Beacon frame.
+ *	This event is used to update dynamic MU-EDCA parameters in Beacon frame,
+ *	coming from driver and now need to be reflected in Beacon frame.
  *
  * @NL80211_CMD_AWGN_DETECT: Once AWGN interference is detected on the operating
  *	channel, userspace is notified with the interference bitmap using
  *	%NL80211_ATTR_AWGN_INTERFERENCE_BITMAP
- *
+ * @NL80211_ATTR_AWGN_INTERFERENCE_BITMAP: u32 attribute specifying the
+ *	interference bitmap of operating bandwidth for %NL80211_CMD_AWGN_DETECT
  * @NL80211_CMD_MAX: highest used command number
  * @__NL80211_CMD_AFTER_LAST: internal use
  */
@@ -1574,10 +1579,13 @@ enum nl80211_commands {
 
 	NL80211_CMD_SET_HW_TIMESTAMP,
 
+	NL80211_CMD_LINKS_REMOVED,
+
 	NL80211_CMD_UPDATE_HE_MUEDCA_PARAMS,
 
 	NL80211_CMD_AWGN_DETECT,
 
+	NL80211_CMD_STOP_BGRADAR_DETECT,
 	/* add new commands above here */
 
 	/* used to define NL80211_CMD_MAX below */
@@ -2597,6 +2605,11 @@ enum nl80211_commands {
  *	association request when used with NL80211_CMD_NEW_STATION). Can be set
  *	only if %NL80211_STA_FLAG_WME is set.
  *
+ * @NL80211_ATTR_AP_PS: enable/disable AP power save.
+ * 	This attribute type is u8 and valid range is 0 to 1.
+ * 	0 for disable AP power save mode.
+ * 	1 for enable AP power save mode.
+ *
  * @NL80211_ATTR_FTM_RESPONDER: nested attribute which user-space can include
  *	in %NL80211_CMD_START_AP or %NL80211_CMD_SET_BEACON for fine timing
  *	measurement (FTM) responder functionality and containing parameters as
@@ -2798,12 +2811,6 @@ enum nl80211_commands {
  *	the incoming frame RX timestamp.
  * @NL80211_ATTR_TD_BITMAP: Transition Disable bitmap, for subsequent
  *	(re)associations.
- * @NL80211_ATTR_HE_MUEDCA_PARAMS: MU-EDCA AC parameters for the
- *	NL80211_CMD_UPDATE_HE_MUEDCA_PARAMS command.
- *
- * @NL80211_ATTR_BEACON_TX_MODE: used to configure the beacon tx mode as
- *	staggered mode or burst mode in %NL80211_CMD_START_AP from
- *	user-space.
  *
  *src/drivers/nl80211_copy.h @NL80211_ATTR_PUNCT_BITMAP: (u32) Preamble puncturing bitmap, lowest
  *	bit corresponds to the lowest 20 MHz channel. Each bit set to 1
@@ -2830,11 +2837,44 @@ enum nl80211_commands {
  *
  * @NL80211_ATTR_AWGN_INTERFERENCE_BITMAP: u32 attribute specifying the
  *	interference bitmap of operating bandwidth for %NL80211_CMD_AWGN_DETECT
+ * @NL80211_ATTR_MLO_LINK_DISABLED: Flag attribute indicating that the link is
+ *	disabled.
  *
- * @NL80211_ATTR_AP_PS: enable/disable AP power save.
- * This attribute type is u8 and valid range is 0 to 1.
- * 0 for disable AP power save mode.
- * 1 for enable AP power save mode.
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ *	transmit power to stay within regulatory limits. u32, dBi.
+ *
+ * @NL80211_ATTR_HE_MUEDCA_PARAMS: MU-EDCA AC parameters for the
+ *	%NL80211_CMD_UPDATE_HE_MUEDCA_PARAMS command.
+ * @NL80211_ATTR_BEACON_TX_MODE: used to configure the beacon tx mode as
+ *	staggered mode = 1 or burst mode = 2 in %NL80211_CMD_START_AP or
+ *	%NL80211_CMD_JOIN_MESH from user-space.
+ *
+ * @NL80211_ATTR_RU_PUNCT_SUPP_BW: (u8) Minimum bandwidth for which
+ *	the driver supports preamble puncturing, value should be of type
+ *	&enum nl80211_ru_punct_supp_bw
+ *
+ * @NL80211_ATTR_RU_PUNCT_SUPP_HE: flag attribute, used to indicate that RU
+ *	puncturing bitmap validation should include OFDMA bitmaps.
+ *
+ * @NL80211_ATTR_RU_PUNCT_BITMAP: (u16) RU puncturing bitmap where the lowest
+ *	bit corresponds to the lowest 20 MHz channel. Each bit set to 1
+ *	indicates that the sub-channel is punctured, set 0 indicates that the
+ *	channel is active.
+ *
+ * @NL80211_ATTR_MULTI_HW_MACS: nested attribute to send the hardware mac
+ *     specific channel capabilities to user space. Drivers registering
+ *     multiple physical hardware under a wiphy can use this attribute,
+ *     see &enum nl80211_multi_hw_mac_attrs.
+ *
+ * @NL80211_ATTR_RADAR_BITMAP: (u16) RADAR bitmap where the lowest bit
+ *      corresponds to the lowest 20MHZ channel. Each bit set to 1
+ *      indicates that radar is detected in that sub-channel.
+ *
+ * @NL80211_ATTR_ADD_MULTI_CHAN: Add channel to the radio, this is used
+ *  for monitor interface (u32).
+ *
+ * @NL80211_ATTR_DEL_MULTI_CHAN: Delete channel from the radio, this is used
+ *  for monitor interface (u32).
  * @NL80211_ATTR_RADAR_BITMAP: (u16) RADAR bitmap where the lowest bit
  *     corresponds to the lowest 20MHZ channel. Each bit set to 1
  *     indicates that radar is detected in that sub-channel.
@@ -3377,12 +3417,16 @@ enum nl80211_attrs {
 	NL80211_ATTR_MAX_HW_TIMESTAMP_PEERS,
 	NL80211_ATTR_HW_TIMESTAMP_ENABLED,
 
-	NL80211_ATTR_HE_MUEDCA_PARAMS,
+	NL80211_ATTR_EMA_RNR_ELEMS,
 
-	NL80211_ATTR_BEACON_TX_MODE,
+	NL80211_ATTR_MLO_LINK_DISABLED,
 
 	NL80211_ATTR_WIPHY_ANTENNA_GAIN,
 
+	NL80211_ATTR_HE_MUEDCA_PARAMS,
+
+	NL80211_ATTR_BEACON_TX_MODE,
+
 	NL80211_ATTR_STA_MGMT_RTS_CTS_CONFIG,
 
 	NL80211_ATTR_AWGN_INTERFERENCE_BITMAP,
@@ -3461,8 +3505,9 @@ enum nl80211_attrs {
  * present in %NL80211_CMD_GET_WIPHY response.
  */
 #define NL80211_MAX_NR_AKM_SUITES		2
-#define NL80211_EHT_MIN_CAPABILITY_LEN          13
+#define NL80211_EHT_MIN_CAPABILITY_LEN          12
 #define NL80211_EHT_MAX_CAPABILITY_LEN          51
+#define NL80211_EHT240_MAX_CAPABILITY_LEN	10
 
 #define NL80211_MIN_REMAIN_ON_CHANNEL_TIME	10
 
@@ -3514,6 +3559,9 @@ enum nl80211_iftype {
 	NL80211_IFTYPE_P2P_DEVICE,
 	NL80211_IFTYPE_OCB,
 	NL80211_IFTYPE_NAN,
+#ifdef CPTCFG_MAC80211_BONDED_SUPPORT
+	NL80211_IFTYPE_DUMMY,
+#endif
 
 	/* keep last */
 	NUM_NL80211_IFTYPES,
@@ -3644,6 +3692,18 @@ enum nl80211_eht_gi {
 };
 
 /**
+ * enum nl80211_eht_ltf - EHT long training field
+ * @NL80211_RATE_INFO_EHT_1xLTF: 3.2 usec
+ * @NL80211_RATE_INFO_EHT_2xLTF: 6.4 usec
+ * @NL80211_RATE_INFO_EHT_4xLTF: 12.8 usec
+ */
+enum nl80211_eht_ltf {
+	NL80211_RATE_INFO_EHT_1XLTF,
+	NL80211_RATE_INFO_EHT_2XLTF,
+	NL80211_RATE_INFO_EHT_4XLTF,
+};
+
+/**
  * enum nl80211_eht_ru_alloc - EHT RU allocation values
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation
  * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation
@@ -3727,6 +3787,13 @@ enum nl80211_eht_ru_alloc {
  *	(u8, see &enum nl80211_eht_gi)
  * @NL80211_RATE_INFO_EHT_RU_ALLOC: EHT RU allocation, if not present then
  *	non-OFDMA was used (u8, see &enum nl80211_eht_ru_alloc)
+ * @NL80211_RATE_INFO_S1G_MCS: S1G MCS index (u8, 0-10)
+ * @NL80211_RATE_INFO_S1G_NSS: S1G NSS value (u8, 1-4)
+ * @NL80211_RATE_INFO_1_MHZ_WIDTH: 1 MHz S1G rate
+ * @NL80211_RATE_INFO_2_MHZ_WIDTH: 2 MHz S1G rate
+ * @NL80211_RATE_INFO_4_MHZ_WIDTH: 4 MHz S1G rate
+ * @NL80211_RATE_INFO_8_MHZ_WIDTH: 8 MHz S1G rate
+ * @NL80211_RATE_INFO_16_MHZ_WIDTH: 16 MHz S1G rate
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -3753,6 +3820,13 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_EHT_NSS,
 	NL80211_RATE_INFO_EHT_GI,
 	NL80211_RATE_INFO_EHT_RU_ALLOC,
+	NL80211_RATE_INFO_S1G_MCS,
+	NL80211_RATE_INFO_S1G_NSS,
+	NL80211_RATE_INFO_1_MHZ_WIDTH,
+	NL80211_RATE_INFO_2_MHZ_WIDTH,
+	NL80211_RATE_INFO_4_MHZ_WIDTH,
+	NL80211_RATE_INFO_8_MHZ_WIDTH,
+	NL80211_RATE_INFO_16_MHZ_WIDTH,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -4157,6 +4231,10 @@ enum nl80211_band_attr {
 
 #define NL80211_BAND_ATTR_HT_CAPA NL80211_BAND_ATTR_HT_CAPA
 
+#define NL80211_NUM_POWER_MODES_PER_IFTYPE	3
+#define GET_POWER_MODE_FOR_NON_AP_STA(pwr_mode_usr, pwr_mode_bcn)	\
+	(NL80211_NUM_POWER_MODES_PER_IFTYPE * (1 + pwr_mode_usr) + pwr_mode_bcn)
+
 enum nl80211_regulatory_power_modes {
 	NL80211_REG_AP_LPI,
 	NL80211_REG_AP_SP,
@@ -4263,6 +4341,8 @@ enum nl80211_wmm_rule {
  *	as the primary or any of the secondary channels isn't possible
  * @NL80211_FREQUENCY_ATTR_NO_EHT: EHT operation is not allowed on this channel
  *	in current regulatory domain.
+ * @NL80211_FREQUENCY_ATTR_PSD: power spectral density (in dBm)
+ *	is allowed on this channel in current regulatory domain.
  * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number
  *	currently defined
  * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use
@@ -4403,7 +4483,7 @@ enum nl80211_reg_type {
  * @NL80211_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds.
  *	If not present or 0 default CAC time will be used.
  * @NL80211_ATTR_POWER_RULE_PSD: power spectral density (in dBm).
- *      This could be negative.
+ *	This could be negative.
  * @NL80211_ATTR_REG_POWER_MODE: the regulatory power mode for 6G rules
  * @NL80211_REG_RULE_ATTR_MAX: highest regulatory rule attribute number
  *	currently defined
@@ -4508,6 +4588,8 @@ enum nl80211_sched_scan_match_attr {
  * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed
  * @NL80211_RRF_NO_HE: HE operation not allowed
  * @NL80211_RRF_NO_320MHZ: 320MHz operation not allowed
+ * @NL80211_RRF_NO_EHT: EHT operation not allowed
+ * @NL80211_RRF_PSD: channels has power spectral density value
  */
 enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_OFDM		= 1<<0,
@@ -4527,6 +4609,8 @@ enum nl80211_reg_rule_flags {
 	NL80211_RRF_NO_160MHZ		= 1<<16,
 	NL80211_RRF_NO_HE		= 1<<17,
 	NL80211_RRF_NO_320MHZ		= 1<<18,
+	NL80211_RRF_NO_EHT		= 1<<19,
+	NL80211_RRF_PSD                 = 1<<20,
 };
 
 #define NL80211_RRF_PASSIVE_SCAN	NL80211_RRF_NO_IR
@@ -4695,6 +4779,11 @@ enum nl80211_mesh_power_mode {
 	NL80211_MESH_POWER_MAX = __NL80211_MESH_POWER_AFTER_LAST - 1
 };
 
+enum nl80211_mgmt_rts_cts_conf {
+	NL80211_MGMT_RTS_CTS_ENABLE,
+	NL80211_MGMT_RTS_CTS_DISABLE,
+};
+
 /**
  * enum nl80211_meshconf_params - mesh configuration parameters
  *
@@ -5309,9 +5398,11 @@ enum nl80211_key_attributes {
  *	see &struct nl80211_txrate_he
  * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us.
  * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF.
+ * @NL80211_TXRATE_HE_UL: HE MCS rates of connected HE STA for uplink traffic.
  * @NL80211_TXRATE_EHT: EHT rates allowed for TX rate selection,
- * see &struct nl80211_txrate_eht
- *
+ * 	see &struct nl80211_txrate_eht
+ * @NL80211_TXRATE_EHT_GI: configure EHT GI, 0.8us, 1.6us and 3.2us.
+ * @NL80211_TXRATE_EHT_LTF: configure EHT LTF, 1XLTF, 2XLTF and 4XLTF.
  * @__NL80211_TXRATE_AFTER_LAST: internal
  * @NL80211_TXRATE_MAX: highest TX rate attribute
  */
@@ -5324,7 +5415,10 @@ enum nl80211_tx_rate_attributes {
 	NL80211_TXRATE_HE,
 	NL80211_TXRATE_HE_GI,
 	NL80211_TXRATE_HE_LTF,
+	NL80211_TXRATE_HE_UL,
 	NL80211_TXRATE_EHT,
+	NL80211_TXRATE_EHT_GI,
+	NL80211_TXRATE_EHT_LTF,
 
 	/* keep last */
 	__NL80211_TXRATE_AFTER_LAST,
@@ -5343,6 +5437,7 @@ struct nl80211_txrate_vht {
 };
 
 #define NL80211_HE_NSS_MAX		8
+#define NL80211_EHT_NSS_MAX             16
 /**
  * struct nl80211_txrate_he - HE MCS/NSS txrate bitmap
  * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.)
@@ -5397,6 +5492,11 @@ enum nl80211_ps_state {
 	NL80211_PS_ENABLED,
 };
 
+enum nl80211_mpath_change_notify {
+	NL80211_MPATH_METRIC_CHANGE,
+	NL80211_MPATH_BROKEN_NOTIFY,
+};
+
 /**
  * enum nl80211_attr_cqm - connection quality monitor attributes
  * @__NL80211_ATTR_CQM_INVALID: invalid
@@ -5441,6 +5541,7 @@ enum nl80211_attr_cqm {
 	NL80211_ATTR_CQM_TXE_INTVL,
 	NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
 	NL80211_ATTR_CQM_RSSI_LEVEL,
+	NL80211_ATTR_CQM_MPATH_CHANGE_EVENT,
 
 	/* keep last */
 	__NL80211_ATTR_CQM_AFTER_LAST,
@@ -5554,6 +5655,8 @@ enum nl80211_tid_config_attr {
 	NL80211_TID_CONFIG_ATTR_AMSDU_CTRL,
 	NL80211_TID_CONFIG_ATTR_TX_RATE_TYPE,
 	NL80211_TID_CONFIG_ATTR_TX_RATE,
+	NL80211_TID_CONFIG_ATTR_AMPDU_COUNT,
+	NL80211_TID_CONFIG_ATTR_AMSDU_COUNT,
 
 	/* keep last */
 	__NL80211_TID_CONFIG_ATTR_AFTER_LAST,
@@ -5938,6 +6041,10 @@ enum nl80211_iface_limit_attrs {
  * @NL80211_IFACE_COMB_BI_MIN_GCD: u32 attribute specifying the minimum GCD of
  *	different beacon intervals supported by all the interface combinations
  *	in this group (if not present, all beacon intervals be identical).
+ * @NL80211_IFACE_COMB_PER_HW_COMB: nested attribute specifying the interface
+ *	combination for each underlying hardware when multiple hardware are
+ *	registered under a single wiphy,
+ *	see &enum nl80211_if_combination_per_hw_comb_attrs.
  * @NUM_NL80211_IFACE_COMB: number of attributes
  * @MAX_NL80211_IFACE_COMB: highest attribute number
  *
@@ -5954,7 +6061,18 @@ enum nl80211_iface_limit_attrs {
  *	numbers = [ #{STA} <= 1, #{P2P-client,P2P-GO} <= 3 ], max = 4
  *	=> allows a STA plus three P2P interfaces
  *
- * The list of these four possibilities could completely be contained
+ *	When describing per-hw combinations, the first possibility can
+ *	further include the finer capabilities like below
+ *	hw_chan_idx = 0, numbers = [ #{STA} <= 1, #{AP} <= 1 ],
+ *	channels = 1, max = 2
+ *	=> allows a STA plus an AP interface on the underlying hw mac
+ *	   advertised at index 0 in wiphy @hw_chans array.
+ *	hw_chan_idx = 1, numbers = [ #{STA} <= 1, #{AP} <= 2 ],
+ *	channels = 1, max = 3
+ *	=> allows a STA plus two AP interfaces on the underlying hw mac
+ *	   advertised at index 1 in wiphy @hw_chans array.
+ *
+ * The list of these five possibilities could completely be contained
  * within the %NL80211_ATTR_INTERFACE_COMBINATIONS attribute to indicate
  * that any of these groups must match.
  *
@@ -5980,7 +6098,6 @@ enum nl80211_if_combination_attrs {
 	MAX_NL80211_IFACE_COMB = NUM_NL80211_IFACE_COMB - 1
 };
 
-
 /**
  * enum nl80211_if_combination_per_hw_comb_attrs - per-hw iface combination
  * attributes with multi-hw radios
@@ -6575,12 +6692,12 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD,
 	NL80211_EXT_FEATURE_WIDE_BAND_SCAN,
 	NL80211_EXT_FEATURE_RADAR_BACKGROUND,
-	NL80211_EXT_FEATURE_STA_MGMT_RTS_CTS,
-	NL80211_EXT_FEATURE_BEACON_RATE_EHT,
 	NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE,
 	NL80211_EXT_FEATURE_PUNCT,
 	NL80211_EXT_FEATURE_SECURE_NAN,
 	NL80211_EXT_FEATURE_AUTH_AND_DEAUTH_RANDOM_TA,
+	NL80211_EXT_FEATURE_STA_MGMT_RTS_CTS,
+	NL80211_EXT_FEATURE_BEACON_RATE_EHT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -6705,6 +6822,8 @@ enum nl80211_timeout_reason {
  *	these channels would passively be scanned. Also note that when the flag
  *	is set, in addition to the colocated APs, PSC channels would also be
  *	scanned if the user space has asked for it.
+ * @NL80211_SCAN_FLAG_WIDE_BAND_SCAN: This flag intends the driver to perform
+ *	wide band scan only if the driver supports it.
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
@@ -6722,6 +6841,7 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12,
 	NL80211_SCAN_FLAG_FREQ_KHZ				= 1<<13,
 	NL80211_SCAN_FLAG_COLOCATED_6GHZ			= 1<<14,
+	NL80211_SCAN_FLAG_WIDE_BAND_SCAN			= 1<<15,
 };
 
 /**
@@ -7920,6 +8040,11 @@ enum nl80211_sar_specs_attrs {
  *	Setting this flag is permitted only if the driver advertises EMA support
  *	by setting wiphy->ema_max_profile_periodicity to non-zero.
  *
+ * @NL80211_MBSSID_CONFIG_ATTR_TX_LINK_ID: Mandatory parameter for a non-transmitted profile
+ *	which provides the interface index (u32) of the transmitted profile which
+ * 	is an MLD. The link id must be valid in the wdev of given Transmitting interface
+ * 	index.
+ *
  * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal
  * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute
  */
@@ -7991,8 +8116,8 @@ enum nl80211_multi_hw_mac_attrs {
        /* keep last */
        __NL80211_MULTI_HW_MAC_ATTR_LAST,
        NL80211_MULTI_HW_MAC_ATTR_MAX = __NL80211_MULTI_HW_MAC_ATTR_LAST - 1
- };
- 
+};
+
 /**
  * nl80211_multi_hw_mac_chan_list_attrs - channel attributes for multi-hw
  *