wlan-ap-Telecominfraproject/feeds/ipq807x/hostapd/patches/300-noscan.patch
John Crispin 3affbc1cad QualComm/AX: add Hawkeye and Cypress support
This series is based on
* 2020-07-10 ipq6018-ilq-11-0_qca_oem-034672b0676c37b1f4519e5720e18e95fe6236ef

Add support for
* qsdk kernel/v4.4
* qsdk ethernet subsystem
* v5.7 ath11k backport + QualComm staging patches (wlan_ap_1.0)
* ath11k-firmware
* hostapd/iw/...

Feature support
* full boot, system detection
* sysupgrade to nand
* HE support via latest hostapd
* driver support for usb, crypto, hwmon, cpufreq, ...

Missing
* NSS/HW flow offloading - FW blob is not redistributable

Using the qsdk v4.4 is an intermediate solution while the vanilla is being
tested. Vanilla kernel is almost on feature par. Work has already started
to upstream the ethernet and switch drivers. Once complete the target will
be fully upstream.

Signed-off-by: John Crispin <john@phrozen.org>
2020-07-23 18:54:03 +02:00

59 lines
1.8 KiB
Diff

--- a/hostapd/config_file.c
+++ b/hostapd/config_file.c
@@ -3493,6 +3493,10 @@ static int hostapd_config_fill(struct ho
if (bss->ocv && !bss->ieee80211w)
bss->ieee80211w = 1;
#endif /* CONFIG_OCV */
+ } else if (os_strcmp(buf, "noscan") == 0) {
+ conf->noscan = atoi(pos);
+ } else if (os_strcmp(buf, "ht_coex") == 0) {
+ conf->no_ht_coex = !atoi(pos);
} else if (os_strcmp(buf, "ieee80211n") == 0) {
conf->ieee80211n = atoi(pos);
} else if (os_strcmp(buf, "ht_capab") == 0) {
--- a/src/ap/ap_config.h
+++ b/src/ap/ap_config.h
@@ -984,6 +984,8 @@ struct hostapd_config {
int ht_op_mode_fixed;
u16 ht_capab;
+ int noscan;
+ int no_ht_coex;
int ieee80211n;
int secondary_channel;
int no_pri_sec_switch;
--- a/src/ap/hw_features.c
+++ b/src/ap/hw_features.c
@@ -500,7 +500,8 @@ static int ieee80211n_check_40mhz(struct
int ret;
/* Check that HT40 is used and PRI / SEC switch is allowed */
- if (!iface->conf->secondary_channel || iface->conf->no_pri_sec_switch)
+ if (!iface->conf->secondary_channel || iface->conf->no_pri_sec_switch ||
+ iface->conf->noscan)
return 0;
hostapd_set_state(iface, HAPD_IFACE_HT_SCAN);
--- a/src/ap/ieee802_11_ht.c
+++ b/src/ap/ieee802_11_ht.c
@@ -230,6 +230,9 @@ void hostapd_2040_coex_action(struct hos
return;
}
+ if (iface->conf->noscan || iface->conf->no_ht_coex)
+ return;
+
if (len < IEEE80211_HDRLEN + 2 + sizeof(*bc_ie)) {
wpa_printf(MSG_DEBUG,
"Ignore too short 20/40 BSS Coexistence Management frame");
@@ -390,6 +393,9 @@ void ht40_intolerant_add(struct hostapd_
if (iface->current_mode->mode != HOSTAPD_MODE_IEEE80211G)
return;
+ if (iface->conf->noscan || iface->conf->no_ht_coex)
+ return;
+
wpa_printf(MSG_INFO, "HT: Forty MHz Intolerant is set by STA " MACSTR
" in Association Request", MAC2STR(sta->addr));