mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-12-19 10:23:03 +00:00
3affbc1cad
This series is based on * 2020-07-10 ipq6018-ilq-11-0_qca_oem-034672b0676c37b1f4519e5720e18e95fe6236ef Add support for * qsdk kernel/v4.4 * qsdk ethernet subsystem * v5.7 ath11k backport + QualComm staging patches (wlan_ap_1.0) * ath11k-firmware * hostapd/iw/... Feature support * full boot, system detection * sysupgrade to nand * HE support via latest hostapd * driver support for usb, crypto, hwmon, cpufreq, ... Missing * NSS/HW flow offloading - FW blob is not redistributable Using the qsdk v4.4 is an intermediate solution while the vanilla is being tested. Vanilla kernel is almost on feature par. Work has already started to upstream the ethernet and switch drivers. Once complete the target will be fully upstream. Signed-off-by: John Crispin <john@phrozen.org>
69 lines
2.2 KiB
Diff
69 lines
2.2 KiB
Diff
--- a/wpa_supplicant/config.c
|
|
+++ b/wpa_supplicant/config.c
|
|
@@ -2478,6 +2478,7 @@ static const struct parse_data ssid_fiel
|
|
#else /* CONFIG_MESH */
|
|
{ INT_RANGE(mode, 0, 4) },
|
|
#endif /* CONFIG_MESH */
|
|
+ { INT_RANGE(noscan, 0, 1) },
|
|
{ INT_RANGE(proactive_key_caching, 0, 1) },
|
|
{ INT_RANGE(disabled, 0, 2) },
|
|
{ STR(id_str) },
|
|
--- a/wpa_supplicant/config_file.c
|
|
+++ b/wpa_supplicant/config_file.c
|
|
@@ -866,6 +866,7 @@ static void wpa_config_write_network(FIL
|
|
#endif /* IEEE8021X_EAPOL */
|
|
INT(mode);
|
|
INT(no_auto_peer);
|
|
+ INT(noscan);
|
|
INT(mesh_fwding);
|
|
INT(frequency);
|
|
INT(enable_edmg);
|
|
--- a/wpa_supplicant/mesh.c
|
|
+++ b/wpa_supplicant/mesh.c
|
|
@@ -368,6 +368,8 @@ static int wpa_supplicant_mesh_init(stru
|
|
frequency);
|
|
goto out_free;
|
|
}
|
|
+ if (ssid->noscan)
|
|
+ conf->noscan = 1;
|
|
if (ssid->ht40)
|
|
conf->secondary_channel = ssid->ht40;
|
|
if (conf->hw_mode == HOSTAPD_MODE_IEEE80211A && ssid->vht) {
|
|
--- a/wpa_supplicant/wpa_supplicant.c
|
|
+++ b/wpa_supplicant/wpa_supplicant.c
|
|
@@ -2338,12 +2338,12 @@ void ibss_mesh_setup_freq(struct wpa_sup
|
|
int ieee80211_mode = wpas_mode_to_ieee80211_mode(ssid->mode);
|
|
enum hostapd_hw_mode hw_mode;
|
|
struct hostapd_hw_modes *mode = NULL;
|
|
- int ht40plus[] = { 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
|
|
+ int ht40plus[] = { 1, 2, 3, 4, 5, 6, 36, 44, 52, 60, 100, 108, 116, 124, 132, 149, 157,
|
|
184, 192 };
|
|
int vht80[] = { 36, 52, 100, 116, 132, 149 };
|
|
struct hostapd_channel_data *pri_chan = NULL, *sec_chan = NULL;
|
|
u8 channel;
|
|
- int i, chan_idx, ht40 = -1, res, obss_scan = 1;
|
|
+ int i, chan_idx, ht40 = -1, res, obss_scan = !(ssid->noscan);
|
|
unsigned int j, k;
|
|
struct hostapd_freq_params vht_freq;
|
|
int chwidth, seg0, seg1;
|
|
@@ -2425,7 +2425,7 @@ void ibss_mesh_setup_freq(struct wpa_sup
|
|
#endif /* CONFIG_HE_OVERRIDES */
|
|
|
|
/* Setup higher BW only for 5 GHz */
|
|
- if (mode->mode != HOSTAPD_MODE_IEEE80211A)
|
|
+ if (mode->mode != HOSTAPD_MODE_IEEE80211A && !(ssid->noscan))
|
|
return;
|
|
|
|
for (chan_idx = 0; chan_idx < mode->num_channels; chan_idx++) {
|
|
--- a/wpa_supplicant/config_ssid.h
|
|
+++ b/wpa_supplicant/config_ssid.h
|
|
@@ -971,6 +971,8 @@ struct wpa_ssid {
|
|
*/
|
|
int no_auto_peer;
|
|
|
|
+ int noscan;
|
|
+
|
|
/**
|
|
* mesh_rssi_threshold - Set mesh parameter mesh_rssi_threshold (dBm)
|
|
*
|