wlan-ap-Telecominfraproject/feeds/wifi-ax/mac80211/patches/qca/086-ath11k-add-support-for-channel-rx-tx-time-in-survey-dump.patch
John Crispin 8cd26b4b50 ipq807x: update to 11.4-CS
Signed-off-by: John Crispin <john@phrozen.org>
2021-09-14 09:16:23 +02:00

55 lines
1.9 KiB
Diff

--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -1376,6 +1376,7 @@ int ath11k_wmi_pdev_bss_chan_info_reques
WMI_TAG_PDEV_BSS_CHAN_INFO_REQUEST) |
FIELD_PREP(WMI_TLV_LEN, sizeof(*cmd) - TLV_HDR_SIZE);
cmd->req_type = type;
+ cmd->pdev_id = ar->pdev->pdev_id;
ath11k_dbg(ar->ab, ATH11K_DBG_WMI,
"WMI bss chan info req type %d\n", type);
@@ -3851,7 +3852,7 @@ ath11k_wmi_copy_resource_config(struct w
wmi_cfg->bpf_instruction_size = tg_cfg->bpf_instruction_size;
wmi_cfg->max_bssid_rx_filters = tg_cfg->max_bssid_rx_filters;
wmi_cfg->use_pdev_id = tg_cfg->use_pdev_id;
- wmi_cfg->flag1 = tg_cfg->atf_config;
+ wmi_cfg->flag1 |= WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64;
wmi_cfg->peer_map_unmap_v2_support = tg_cfg->peer_map_unmap_v2_support;
wmi_cfg->sched_params = tg_cfg->sched_params;
wmi_cfg->twt_ap_pdev_count = tg_cfg->twt_ap_pdev_count;
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -2243,6 +2243,8 @@ struct wmi_init_cmd {
u32 num_host_mem_chunks;
} __packed;
+#define WMI_RSRC_CFG_FLAG1_BSS_CHANNEL_INFO_64 BIT(5)
+
struct wmi_resource_config {
u32 tlv_header;
u32 num_vdevs;
@@ -2970,6 +2972,7 @@ struct wmi_pdev_bss_chan_info_req_cmd {
u32 tlv_header;
/* ref wmi_bss_chan_info_req_type */
u32 req_type;
+ u32 pdev_id;
} __packed;
struct wmi_ap_ps_peer_cmd {
@@ -4092,7 +4095,6 @@ struct wmi_vdev_stopped_event {
} __packed;
struct wmi_pdev_bss_chan_info_event {
- u32 pdev_id;
u32 freq; /* Units in MHz */
u32 noise_floor; /* units are dBm */
/* rx clear - how often the channel was unused */
@@ -4110,6 +4112,7 @@ struct wmi_pdev_bss_chan_info_event {
/*rx_cycle cnt for my bss in 64bits format */
u32 rx_bss_cycle_count_low;
u32 rx_bss_cycle_count_high;
+ u32 pdev_id;
} __packed;
#define WMI_VDEV_INSTALL_KEY_COMPL_STATUS_SUCCESS 0