mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-12-18 09:51:26 +00:00
3affbc1cad
This series is based on * 2020-07-10 ipq6018-ilq-11-0_qca_oem-034672b0676c37b1f4519e5720e18e95fe6236ef Add support for * qsdk kernel/v4.4 * qsdk ethernet subsystem * v5.7 ath11k backport + QualComm staging patches (wlan_ap_1.0) * ath11k-firmware * hostapd/iw/... Feature support * full boot, system detection * sysupgrade to nand * HE support via latest hostapd * driver support for usb, crypto, hwmon, cpufreq, ... Missing * NSS/HW flow offloading - FW blob is not redistributable Using the qsdk v4.4 is an intermediate solution while the vanilla is being tested. Vanilla kernel is almost on feature par. Work has already started to upstream the ethernet and switch drivers. Once complete the target will be fully upstream. Signed-off-by: John Crispin <john@phrozen.org>
29 lines
1022 B
Diff
29 lines
1022 B
Diff
--- a/drivers/net/wireless/ath/ath11k/debugfs_sta.c
|
|
+++ b/drivers/net/wireless/ath/ath11k/debugfs_sta.c
|
|
@@ -500,13 +500,11 @@ static ssize_t ath11k_dbg_sta_dump_rx_st
|
|
int len = 0, i, retval = 0;
|
|
const int size = 4 * 4096;
|
|
char *buf;
|
|
- int he_rates_avail = (rx_stats->pream_cnt[HAL_RX_PREAMBLE_11AX] > 1) ? 1 : 0;
|
|
- int rate_table_len = he_rates_avail ? ATH11K_RX_RATE_TABLE_11AX_NUM :
|
|
- ATH11K_RX_RATE_TABLE_NUM;
|
|
+ int he_rates_avail;
|
|
+ int rate_table_len;
|
|
char *legacy_rate_str[] = {"1Mbps", "2Mbps", "5.5Mbps", "6Mbps",
|
|
"9Mbps", "11Mbps", "12Mbps", "18Mbps",
|
|
"24Mbps", "36 Mbps", "48Mbps", "54Mbps"};
|
|
-
|
|
if (!rx_stats)
|
|
return -ENOENT;
|
|
|
|
@@ -514,6 +512,9 @@ static ssize_t ath11k_dbg_sta_dump_rx_st
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
+ he_rates_avail = (rx_stats->pream_cnt[HAL_RX_PREAMBLE_11AX] > 1) ? 1 : 0;
|
|
+ rate_table_len = he_rates_avail ? ATH11K_RX_RATE_TABLE_11AX_NUM :
|
|
+ ATH11K_RX_RATE_TABLE_NUM;
|
|
mutex_lock(&ar->conf_mutex);
|
|
spin_lock_bh(&ar->ab->base_lock);
|
|
|