Piotr Dymacz 560e9f326d mcu: fix host support for multi-slot UART based MCUs ... In case of MCU with multiple firmware slots support, change of active slot requires reset. This obviously results in MCU entering the serial recovery mode in bootloader, with 5 sec timeout, which in case of UART based MCUs isn't automatically detected and handled in the same way as USB based devices (hotplug). Starting host side support script when the MCU is waiting for MCUmgr commands during recovery is wrong. This fixes the problem by requesting UART based MCU to boot the firmware after active slot change followed by reset. While at it, change also how single slot type MCUs are handled during upgrade (always request reset after the upgrade). Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2023-03-23 08:06:42 +01:00
..
bluetooth	bluetooth: add support for various chips	2022-02-04 08:06:05 +01:00
bluetooth-cc2652/cc2652	ipq807x: add edgecore eap104 support	2022-02-16 15:44:24 +01:00
bluetooth-csr	bluetooth: add support for various chips	2022-02-04 08:06:05 +01:00
ipq807x	ipq807x: fix mac address assignment	2023-03-21 07:57:13 +01:00
mcu	mcu: fix host support for multi-slot UART based MCUs	2023-03-23 08:06:42 +01:00
mediatek-sdk/mediatek-sdk	mediatek: add SDK target	2022-02-04 08:06:06 +01:00
realtek	ucentral: development update	2021-07-29 11:50:34 +02:00
rtkmipsel	rtkmipsel: add target support	2022-02-04 08:06:06 +01:00
third-party	chilli-redirect: add uamsecret to list of possible options	2021-10-21 16:02:28 +02:00
tip	openssl is needed to verify the command signatures 1. Enable openssl in AP firmware 2. Copy /certificates/sign_pubkey.pem into /etc/ucentral at boot time	2023-01-27 14:29:54 +01:00
ucentral	ratelimit: SSIDs with spaces failed to be configured	2023-03-23 07:39:11 +01:00
wifi-ath10k	mac80211: automatically restart wifi if bringup failed	2022-03-31 10:58:50 +02:00
wifi-ax	ipq807x: add CIG WF196 BDF	2023-03-09 15:14:36 +01:00