Piotr Dymacz c2c75b67eb ipq807x: add initial support for YunCore AX840 ... This adds initial support for the YunCore AX840, an IPQ6010 based 802.11ax ceiling AP. Specifications: - Qualcomm IPQ6010 - 1 GB of RAM (DDR3) - 8 MB of serial flash (SPI NOR) - 256 MB of parallel flash (NAND) - 2x2 2.4 GHz WiFi (IPQ6010) - 2x2 5 GHz WiFi (IPQ6010) - 2x IPEX/U.FL antenna connectors - 4x 3 dBi dual-band antennas - 2x 1 Gbps Ethernet (QCA8075) with 802.3at PoE input support - 1x RGB LED - 1x push-button (reset) - DC jack for main power input (12 V) - UART (4-pin, 2.54 mm pitch) header on PCB Flash instruction under stock QSDK image: sysupgrade -n openwrt-ipq807x-yuncore_ax840-squashfs-nand-factory.bin Flash instruction under U-Boot: tftpb 0x44000000 openwrt-ipq807x-yuncore_ax840-squashfs-nand-factory.ubi flash rootfs reset Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2022-03-10 14:50:37 +01:00
..
ath11k-firmware	ipq807x: add edgecore eap104 support	2022-02-16 15:44:24 +01:00
ath11k-wifi	ipq807x: add initial support for YunCore AX840	2022-03-10 14:50:37 +01:00
batman-adv	ipq807x: update to 11.4-CS	2021-09-14 09:16:23 +02:00
ftm	ipq807x: add certification support	2022-02-12 12:41:42 +01:00
hostapd	ath11k: fix WDS when encap offload is enabled	2022-03-02 15:45:08 +01:00
iw	treewide: fix pkg hashes	2022-03-01 17:36:52 +01:00
libtcmd	ipq807x: add certification support	2022-02-12 12:41:42 +01:00
mac80211	ath10k: enable threaded napi support	2022-03-02 15:45:08 +01:00
qca-diag	ipq807x: add certification support	2022-02-12 12:41:42 +01:00