wlan-ap-Telecominfraproject/feeds/wifi-ax/hostapd/patches/h00-002-hostapd-Enable-HE40-support-in-2G-11s-mesh.patch

From 42bd9677183c6a71c56c9f36d32e2fb626fdb535 Mon Sep 17 00:00:00 2001
From: P Praneesh <ppranees@codeaurora.org>
Date: Tue, 8 Dec 2020 00:28:00 +0530
Subject: [PATCH] hostapd: Enable HE40 support in 2G 11s mesh

This patch adds support for HE40 in 2G 11s mesh if
the driver advertise HE_PHYCAP_CHANNEL_WIDTH_SET_40MHZ_IN_2G
support in HE capability.

Signed-off-by: P Praneesh <ppranees@codeaurora.org>
---
 wpa_supplicant/wpa_supplicant.c | 30 ++++++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

Index: hostapd-2021-02-18/wpa_supplicant/wpa_supplicant.c
===================================================================
--- hostapd-2021-02-18.orig/wpa_supplicant/wpa_supplicant.c
+++ hostapd-2021-02-18/wpa_supplicant/wpa_supplicant.c
@@ -2378,6 +2378,57 @@ static int drv_supports_vht(struct wpa_s
 	return mode->vht_capab != 0;
 }
 
+static void ibss_mesh_setup_2G_he40(struct hostapd_freq_params *freq,
+				    struct hostapd_hw_modes *mode,
+				    struct wpa_supplicant *wpa_s,
+				    const struct wpa_ssid *ssid,
+				    int ieee80211_mode)
+{
+	struct wpa_scan_results *scan_res;
+	int he40plus2G[] = { 2412, 2417, 2422, 2427, 2432, 2437};
+	int i, res;
+	u8 pri_chan, sec_chan;
+
+	freq->vht_enabled = vht_supported(mode);
+	freq->sec_channel_offset = -1;
+
+	if (mode->he_capab[ieee80211_mode].phy_cap[HE_PHYCAP_CHANNEL_WIDTH_SET_IDX] &
+	    HE_PHYCAP_CHANNEL_WIDTH_SET_40MHZ_IN_2G)
+		freq->bandwidth = 40;
+
+	/* Setting channel offset as 1 for channel 1 to 6 and -1 for
+	 * channel 7 to 11
+	 */
+	for (i = 0; i < ARRAY_SIZE(he40plus2G); i++) {
+		if (freq->freq == he40plus2G[i])
+			freq->sec_channel_offset = 1;
+	}
+
+	freq->center_freq1 = freq->freq + freq->sec_channel_offset * 10;
+	freq->center_freq2 = 0;
+
+	if (ssid->disable_40mhz_scan) {
+		wpa_printf(MSG_DEBUG, "IBSSS: 40MHz Coex scan disabled");
+		return;
+	}
+
+	scan_res = wpa_supplicant_get_scan_results(wpa_s, NULL, 0);
+	if (scan_res == NULL)
+		goto HE20;
+
+	pri_chan = freq->channel;
+	sec_chan = pri_chan + freq->sec_channel_offset * 4;
+	res = check_40mhz_2g4(mode, scan_res, pri_chan, sec_chan);
+	wpa_scan_results_free(scan_res);
+	if (!res)
+		goto HE20;
+	return;
+HE20:
+	freq->sec_channel_offset = 0;
+	freq->bandwidth = 20;
+	freq->center_freq1 = freq->freq + freq->sec_channel_offset * 10;
+}
+
 static bool ibss_mesh_is_80mhz_avail(int channel, struct hostapd_hw_modes *mode)
 {
 	int i;
@@ -2498,6 +2549,11 @@ void ibss_mesh_setup_freq(struct wpa_sup
 		else
 #endif /* CONFIG_HE_OVERRIDES */
 			freq->he_enabled = mode->he_capab[ieee80211_mode].he_supported;
+
+		if (freq->he_enabled)
+			ibss_mesh_setup_2G_he40(freq, mode, wpa_s,
+						ssid, ieee80211_mode);
+		return;
 	}
 
 	for (chan_idx = 0; chan_idx < mode->num_channels; chan_idx++) {
Index: hostapd-2021-02-18/src/drivers/driver.h
===================================================================
--- hostapd-2021-02-18.orig/src/drivers/driver.h
+++ hostapd-2021-02-18/src/drivers/driver.h
@@ -1203,6 +1203,11 @@ struct wpa_driver_associate_params {
 	 * 2 = both hunting-and-pecking loop and hash-to-element enabled
 	 */
 	int sae_pwe;
+
+	/**
+	 * Disable HE40MHz coexistence scan
+	 */
+	int disable_40mhz_scan;
 };
 
 enum hide_ssid {
Index: hostapd-2021-02-18/wpa_supplicant/config.c
===================================================================
--- hostapd-2021-02-18.orig/wpa_supplicant/config.c
+++ hostapd-2021-02-18/wpa_supplicant/config.c
@@ -2804,6 +2804,7 @@ static const struct parse_data ssid_fiel
 	{ INT_RANGE(beacon_prot, 0, 1) },
 	{ INT_RANGE(transition_disable, 0, 255) },
 	{ INT_RANGE(sae_pk, 0, 2) },
+	{ INT_RANGE(disable_40mhz_scan, 0, 1)},
 };
 
 #undef OFFSET
Index: hostapd-2021-02-18/wpa_supplicant/config_file.c
===================================================================
--- hostapd-2021-02-18.orig/wpa_supplicant/config_file.c
+++ hostapd-2021-02-18/wpa_supplicant/config_file.c
@@ -885,7 +885,7 @@ static void wpa_config_write_network(FIL
 #ifdef CONFIG_HE_OVERRIDES
 	INT(disable_he);
 #endif /* CONFIG_HE_OVERRIDES */
-
+	INT(disable_40mhz_scan);
 #undef STR
 #undef INT
 #undef INT_DEF
Index: hostapd-2021-02-18/wpa_supplicant/config_ssid.h
===================================================================
--- hostapd-2021-02-18.orig/wpa_supplicant/config_ssid.h
+++ hostapd-2021-02-18/wpa_supplicant/config_ssid.h
@@ -1165,6 +1165,11 @@ struct wpa_ssid {
 	 * configuration.
 	 */
 	bool was_recently_reconfigured;
+
+	/**
+	 * disable_40mhz_scan - Disable 40MHz coex scan
+	 */
+	int disable_40mhz_scan;
 };
 
 #endif /* CONFIG_SSID_H */
Index: hostapd-2021-02-18/wpa_supplicant/wpa_cli.c
===================================================================
--- hostapd-2021-02-18.orig/wpa_supplicant/wpa_cli.c
+++ hostapd-2021-02-18/wpa_supplicant/wpa_cli.c
@@ -1482,7 +1482,8 @@ static const char *network_fields[] = {
 #ifdef CONFIG_HS20
 	"update_identifier",
 #endif /* CONFIG_HS20 */
-	"mac_addr", "pbss", "wps_disabled"
+	"mac_addr", "pbss", "wps_disabled",
+	"disable_40mhz_scan",
 };
 
 
Index: hostapd-2021-02-18/wpa_supplicant/wpa_supplicant.conf
===================================================================
--- hostapd-2021-02-18.orig/wpa_supplicant/wpa_supplicant.conf
+++ hostapd-2021-02-18/wpa_supplicant/wpa_supplicant.conf
@@ -158,6 +158,9 @@ ap_scan=1
 # 1 = deny unless in accept list
 macaddr_acl=0
 
+# Disable 40MHz co-existence scan in Mesh
+#disable_40mhz_scan=1
+
 # Accept/deny lists are read from separate files (containing list of
 # MAC addresses, one per line). Use absolute path name to make sure that the
 # files can be read on SIGHUP configuration reloads.
@@ -1983,6 +1986,15 @@ network={
 	psk="very secret passphrase"
 }
 
+# Disable 40MHz Co-existence scan in mesh
+network={
+	ssid="OpenWrt"
+        key_mgmt=SAE
+        mode=5
+        frequency=2437
+        psk="1234567890"
+	disable_40mhz_scan=1
+}
 
 # Catch all example that allows more or less all configuration modes
 network={