mirror of
https://github.com/Telecominfraproject/wlan-ap.git
synced 2025-12-19 02:11:28 +00:00
4a6bc07d61
EWW631-A1 (Ceiling mount) Specifications are: * CPU: Qualcomm IPQ5018 * RAM: 512 MB * Storage: 256MB NAND-optional. * Ethernet: 1x GbE * UART header * WLAN: 2.4GHz: IPQ5018, 5GHz: QCN6102 * 3x LED-s à R/G/B PWM control Installation instructions: Connect to UART, pins are like this XA/XB PCBA UART : PIN #5 | #4 | #3 | #2 | #1 GND | x | RX | TX | VCC XC PCBA UART : (next version hardware board) PIN #4 | #3 | #2 | #1 GND | RX | TX | VCC Settings are 115200 8n1 1. Copy openwrt-ipq807x-cybertan_eww631_a1-squashfs-nand-factory.bin onto the board into /tmp/ 2. At board's command prompt, issue sysupgrade -n /tmp/openwrt-ipq807x-cybertan_eww631_a1-squashfs-nand-factory.bin ----------------------------------------------------------------------- EWW631-B1 (Wall mount) Specifications are: * CPU: Qualcomm IPQ5000 * RAM: 256 MB (IPQ5000 inside) * Storage: 256MB NAND-optional. * Ethernet: 4x GbE * UART header * WLAN: 2.4GHz: IPQ5000, 5GHz: QCN6102 * 3x LED-s à R/G/B PWM control Installation instructions: Connect to UART, pins are like this Fixes: WIFI-12579 Signed-off-by: Venkata Chimata <venkata@shasta.cloud> |
||
|---|---|---|
| .. | ||
| ath11k-firmware | ||
| ath11k-fwtest | ||
| ath11k-wifi | ||
| batman-adv | ||
| ftm | ||
| hostapd | ||
| iw | ||
| libtcmd | ||
| mac80211 | ||
| qca-diag | ||