All kernel config symbols are refreshed by `make kernel_oldconfig`.
Some symbols are moved to the generic/config-6.12 because the
refresh tool will automatically trim them.
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18632
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Introduced with Linux 6.7, in commit:
5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing result"),
when a parser returns an error, this will be passed up, and
consequently, all parent mtd partitions get torn down.
Adjust the mtdsplit_uimage driver to only return an error if there is a
critical problem in reading from the mtd device or allocating memory.
Otherwise return 0 to indicate that no partitions were found.
Also add logging to indicate what went wrong.
E.g. on Realtek devices that are booted for the first time through
initramfs with OpenWrt never installed before boot log will show
[ 0.975518] Creating 7 MTD partitions on "spi0.0":
[ 0.981062] 0x000000000000-0x0000000e0000 : "u-boot"
[ 1.041320] 0x0000000e0000-0x0000000f0000 : "u-boot-env"
[ 1.060683] 0x0000000f0000-0x000000100000 : "u-boot-env2"
[ 1.080992] 0x000000100000-0x000000200000 : "jffs2-cfg"
[ 1.100988] 0x000000200000-0x000000300000 : "jffs2-log"
[ 1.120599] 0x000000300000-0x000000fe0000 : "firmware"
[ 1.157426] mtdsplit_uimage: no rootfs after uImage in "firmware"
[ 1.176456] mtdsplit_uimage: no rootfs after uImage in "firmware"
[ 1.200262] 0x000000fe0000-0x000001000000 : "log"
Similar issues were fixed before with commit ade045084b
("kernel: mtdsplit_minor: return 0 if not fatal") and
c78765213e ("kernel: mtdsplit_uimage: return 0 if not fatal")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19163
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Backport accepted BCM5325 patches from net-next.
These patches will be merged in the v6.17 kernel window.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Continuous read does not work properly in on-die ECC mode.
Disable it to fix ubi io error on the GL.iNet GL-MT3000.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
It's time to give the patches documentation some love by:
- Using Markdown.
- Differentiating between generic and specific target patches.
- Adding deeper explanation about patch numbering.
Link: https://github.com/openwrt/openwrt/pull/19092
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reorganize backported 6.12 generic patches, grouping them by following
a standard naming XXX-XX-v6.x-patch-file-name.patch.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Add kernel package for DesignWare I2C platform controller.
This controller is used on the RP1 SoC found on RPi 5 devices.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Add kernel packages for DesignWare SPI core and MMIO controllers.
This is needed for the RP1 SoC found on RPi 5 devices.
Tested with a Microchip ENC28J60 Ethernet controller on a RPi 5.
Signed-off-by: Albrecht Lohofener <albrechtloh@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19049
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Add the following to fix builds with GCC 15.1:
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/commit/arch/mips/vdso?h=next-20250606&id=0f4ae7c6ecb89bfda026d210dcf8216fb67d2333
% dmesg | grep gcc
[ 0.000000] Linux version 6.6.93 (facade@redline) (mipsel-openwrt-linux-musl-gcc (OpenWrt GCC 15.1.0 r29972+15-7d617804cfe7) 15.1.0, GNU ld (GNU Binutils) 2.44) #0 SMP Sat Jun 7 12:13:18 2025
Error for reference:
./include/linux/stddef.h:11:9: error: cannot use keyword 'false' as enumeration constant
11 | false = 0,
| ^~~~~
./include/linux/stddef.h:11:9: note: 'false' is a keyword with '-std=c23' onwards
./include/linux/types.h:35:33: error: 'bool' cannot be defined via 'typedef'
35 | typedef _Bool bool;
| ^~~~
./include/linux/types.h:35:33: note: 'bool' is a keyword with '-std=c23' onwards
./include/linux/types.h:35:1: error: useless type name in empty declaration [-Werror]
35 | typedef _Bool bool;
| ^~~~~~~
CC arch/mips/lib/delay.o
AR arch/mips/fw/lib/built-in.a
AR arch/mips/fw/lib/lib.a
CC arch/mips/ralink/of.o
CC fs/read_write.o
CC block/elevator.o
cc1: all warnings being treated as errors
make[9]: *** [scripts/Makefile.build:243: arch/mips/vdso/vgettimeofday.o] Error 1
make[8]: *** [scripts/Makefile.build:480: arch/mips/vdso] Error 2
Build system: x86/64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Link: https://github.com/openwrt/openwrt/pull/19058
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Introduced with Linux 6.7, in commit:
5c2f7727d437 ("mtd: mtdpart: check for subpartitions parsing result"),
when a parser returns an error, this will be passed up, and
consequently, all parent mtd partitions get torn down.
Adjust the mtdsplit_uimage driver to only return an error if there is a
critical problem in reading from the mtd device or allocating memory.
Otherwise return 0 to indicate that no partitions were found.
Also add logging to indicate what went wrong.
E.g. on Realtek devices that are booted for the first time through
initramfs with OpenWrt never installed before boot log will show
[ 0.932985] Creating 8 MTD partitions on "spi0.0":
[ 0.938412] 0x000000000000-0x000000080000 : "u-boot"
[ 0.990151] 0x000000080000-0x0000000c0000 : "u-boot-env"
[ 0.999907] 0x0000000c0000-0x000000100000 : "board-name"
[ 1.019971] 0x000000100000-0x000000e80000 : "firmware"
[ 1.051582] mtdsplit_uimage: no uImage found in "firmware"
[ 1.069365] 0x000000e80000-0x000001000000 : "kernel2"
[ 1.078959] 0x000001000000-0x000001040000 : "sysinfo"
[ 1.099747] 0x000001040000-0x000001c40000 : "rootfs2"
[ 1.119865] 0x000001c40000-0x000002000000 : "jffs2"
Similar issue was fixed before with commit ade045084b
("kernel: mtdsplit_minor: return 0 if not fatal")
Signed-off-by: Markus Stockhausen <markus.stockhausen@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/19016
Signed-off-by: Robert Marko <robimarko@gmail.com>
The support_eee patch is needed in order to prevent system hangs on bmips
devices.
c4f873c2b65c8 net: dsa: b53: mdio: add support for BCM53101
c86692fc2cb77 net: dsa: b53/bcm_sf2: implement .support_eee() method
f12b363887c70 net: dsa: use ethtool string helpers
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
These patches are needed for b53 implementation of b53_support_eee, which
prevent system hangs on bmips devices.
99379f587278c net: dsa: provide implementation of .support_eee()
9723a77318b7c net: dsa: add hook to determine whether EEE is supported
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
this symbol got picked up by the 6.12 UML conversion.
CONFIG_FBNIC = FaceBook/Meta Platforms Host Network Interface
it should be disabled by default in generic.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
This is needed for mac80211 v6.14.5 update.
9934a1bd45b2b clk: provide devm_clk_get_optional_enabled_with_rate()
9934a1bd45
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This is needed for mac80211 v6.14.5 update.
b35108a51cf7b jiffies: Define secs_to_jiffies()
bb2784d9ab495 jiffies: Cast to unsigned long in secs_to_jiffies() conversion
b35108a51cbb2784d9ab
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
This adds a few ARM-related kconfig options that makes the
configure phase smooth on ARM (32bit) systems.
We default PAN to enabled for protection, however this has
a syscall speed penalty, if your system is interacting a lot
from userspace you might want to disable it for speed vs
security. For in-kernel routing it should not be a major
issue.
Some marginal ARM system enables DRM so make sure we have
the related DRM Kconfigs set up to unselected.
Link: https://github.com/openwrt/openwrt/pull/18900
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The MediaTek Ethernet PHY drivers are going to be used by multiple
targets (airoha, mediatek, ramips). Add generic backports of changes
required for recently added Ethernet PHYs.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
While it will hopefully be replaced soon by an upstream solution for
now we keep the downstream SerDes PCS implementation for MT7988A.
In order to make it work with upstream mt7988a.dtsi we have to
compensate for the changed start address of topmisc which was
moved from 0x11d10000 to 0x11d10084 to accomodate a future power
domain controller located at 0x11d10000~0x11d10080.
Hence we need to change TOP_MISC_NETSYS_PCS_MUX from 0x84 to 0x0, so
the Ethernet path/mux selection can work with upstream mt7988a.dtsi.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Upstream now uses struct ethtool_keee instead of struct ethtool_eee
as parameter to EEE-related functions. Follow that change and modify
the patch accordingly.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Commit fa0f130764 ("generic: 6.12: update block NVMEM driver") switched
to the upstream DT bindings for block partitions.
Bring back the old/legacy downstream way to assign the OF node to a
block device or partition in order to allow sharing a single DTS for
both, Linux 6.6 (which exclusively uses the old/legacy binding) and
Linux 6.12 (which will now support both, new/upstream binding and the
old/legacy binding).
Once we drop Linux 6.6 and all boards have been converted to the new
binding we can drop this patch.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Remove modifications for codes guarded by CONFIG_USB_PCI_AMD.
This kernel symbol is only visible on desktop level platform,
e.g. x86. They are not sensitive to firmware image size. This
patch also fixes function redefinition build errors:
drivers/usb/host/pci-quirks.c:621:6: error: redefinition of 'usb_asmedia_modifyflowcontrol'
621 | void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev)
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from drivers/usb/host/pci-quirks.c:22:
drivers/usb/host/pci-quirks.h:49:20: note: previous definition of 'usb_asmedia_modifyflowcontrol' with type 'void(struct pci_dev *)'
49 | static inline void usb_asmedia_modifyflowcontrol(struct pci_dev *pdev) {}
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fixes: be6753dda0 ("generic: 6.12: manually rebuild pending patches")
Signed-off-by: Shiji Yang <yangshiji66@outlook.com>
Link: https://github.com/openwrt/openwrt/pull/18637
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
CONFIG_IDPF is Intel(R) Infrastructure Data Path Function Support and it
should be disabled by default, if needed it can be packaged as a kmod.
Disable to prevent spreading out through target configs.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Noticed that CONFIG_HISILICON_ERRATUM_162100801 was being added to
qualcommax 6.12 config.
Since we dont support any Hisilicon chips, disable it in generic config
before it starts spreading in target configs.
Signed-off-by: Robert Marko <robimarko@gmail.com>
