mirror of
https://github.com/LiBwrt-op/openwrt-6.x.git
synced 2026-01-07 11:44:44 +00:00
f29bc8736a
CREALITY BOX WB01 is small footprint router based on MediaTek MT7688, is a device intended to interface Creality brand 3D printers to a cloud service. Specifications: - SoC: MediaTek MT7688AN @ 580MHz - RAM: DDR2 128M (Winbond W971GG6SB-25) - Flash: BoyaMicro BY25Q128AS (16 MiB, SPI NOR) handled by BoHong bh25q128as driver - WiFi: 2.4GHz 1T1R internal panel antenna - Ethernet: 1x LAN (10/100) - USB: 2x USB2.0 port (Genesys Logic GL850G 2 port USB 2.0 hub) - UART: 3.3V, TX, RX, GND / 56700 8N1 / only pads on PCB - microSD SD-XC Class 10 slot - micro USB input (for power only) - reset button - FCC ID: 2AXH6CREALITY-BOX MAC addresses as verified by OEM firmware: vendor OpenWrt source LAN eth0 factory 0x2e 2.4GHz phy0-ap0 factory 0x04 (label) LEDs color vendor OpenWRT configurable red SD card activity - yes green Cloud connectivity status yes blue LAN activity eth0 yes yellow WIFI activity phy0tpt yes Return to OEM & debrick - download "cxsw_update.tar.bz2" from manufacturer site - extract archive to FAT32 USB stick root - put USB stick in USB2 port - press & hold reset button - power on device while holding reset - wait approx 10 sec - release reset button Installation with SD Card - power on device - wait for device to finish starting - copy "openwrt-ramips-mt76x8-creality_wb-01-squashfs-cxsw_update.tar.bz2" to root of FAT32 SD card - rename openwrt-ramips-mt76x8-creality_wb-01-squashfs-cxsw_update.tar.bz2 to "cxsw_update.tar.bz2" - put SD card in device - device will install OpenWRT on internal flash Installation via telnet: - extract the "factory.bin" and "install.sh" from newly created openwrt-ramips-mt76x8-creality_wb-01-squashfs-cxsw_update.tar.bz2 to FAT32 USB stick root - telnet to 10.10.10.254, user: root, password: cxswprin - plug the USB in USB1 port - cd /media/usbdisk/ - sh install.sh - device will write "factory.bin" to internal flash Co-authored-by: George Brooke <figgyc@figgyc.uk> Co-authored-by: Peca Nesovanovic <peca.nesovanovic@sattrakt.com> Co-authored-by: shivajiva101 <github.com/shivajiva101> Co-authored-by: Axel Sepulveda <ansepulveda@uc.cl> Signed-off-by: Axel Sepulveda <ansepulveda@uc.cl> Link: https://github.com/openwrt/openwrt/pull/19686 Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| airoha | ||
| apm821xx | ||
| armsr | ||
| at91 | ||
| ath79 | ||
| bcm27xx | ||
| bcm47xx | ||
| bcm53xx | ||
| bcm4908 | ||
| bmips | ||
| d1 | ||
| gemini | ||
| generic | ||
| imx | ||
| ipq40xx | ||
| ipq806x | ||
| ixp4xx | ||
| kirkwood | ||
| lantiq | ||
| layerscape | ||
| loongarch64 | ||
| malta | ||
| mediatek | ||
| mpc85xx | ||
| mvebu | ||
| mxs | ||
| octeon | ||
| omap | ||
| pistachio | ||
| qoriq | ||
| qualcommax | ||
| qualcommbe | ||
| ramips | ||
| realtek | ||
| rockchip | ||
| sifiveu | ||
| siflower | ||
| starfive | ||
| stm32 | ||
| sunxi | ||
| tegra | ||
| uml | ||
| x86 | ||
| zynq | ||
| Makefile | ||